Chemical Feed SystemsKellner LLC Chemical Feed Systems

Chlorination Systems

The staff at Kellner, LLC has extensive knowledge of designing, installing, and maintaining a chlorination system to fit your needs. We have a good working relationship with the New York State Health Department, Cattaraugus County Health Department, Allegany County Health Department, and Pennsylvania Department of Environmental Conservation.

A chlorination system uses sodium hypochlorite, or chlorine, to disinfect your water. It is very important that the chlorination system be installed properly in order for it to work effectively. The equipment used for the system:

  • Stenner Chemical Feed Pump and injector
  • Relay
  • Water Meter
  • Solution tank
  • Retention tank
  • Filtration (if needed)
  • Chlorine Test Kit

A basic system works as follows: the chemical feed pump injects a chlorine solution from the solution tank thru an injector into the piping before the pressure tank; the feed pump comes on every time the water pump comes on by means of a relay or water meter. The chlorinated water goes into the pressure tank then exits to the retention tank, the water must go to a dedicated retention tank in order to give the chlorine time to disinfect the water. Then if you wish the water may go thru a filtration system to remove the taste and odor of the chlorine.Kellner LLC Stenner Pumps Logo

Owner Jay McCarthy also has his Water Plant Operators License and serves commercial and municipal customers in both New York and Pennsylvania.Kellner LLC Stenner Pumps

Hydrogen Peroxide Injection System

Hydrogen Peroxide? In water? You got it! This works great in water for those wells that have lots and lots of sulfur. How does it work?

Sulfur in a glass of water will dissipate out given enough time. This injection unit speeds up this process using Hydrogen Peroxide. Hydrogen Peroxide is injected straight into the water lines using a Stenner® chemical feed pump. After this occurs, the freshly introduced hydrogen peroxide will proceed into a 40 to 120 gallon retention tank. The size of the retention tank is dependent on the amount of sulfur in the water. In this tank is where the hydrogen peroxide gets its contact time with the water. The sulfur free water will now feed the entire house! No more rotten egg smell!

Maintenance on the Hydrogen Peroxide Injection Unit is to keep an eye on the hydrogen peroxide level. When it gets low, give Kellner's a call to fill it up!

We've got what you need

We Stock Hydrogen Peroxide in 1 gallon and 2.5 gallon containers. Chlorine is stocked in 1 gallon, 5 gallon, and 55 gallon containers. All chemicals are NSF approved for use in both Pennsylvania and New York.

 

Looking for a price? Get a no cost, no obligation free estimate.

Top
website powered by
Top
Service Area
Contact